Checkout using your account
Checkout as a new customer
Creating an account has many benefits:
In stock
Brand | Ecostrad |
---|---|
Product Weight (kg) | 10.8 |
Depth (mm) | 22 |
Height (mm) | 905 |
Width (mm) | 1205 |
Wattage (w) | 800 |
Cable Length (m) | 1.9 |
Suitable for Bathrooms | Zone 2 and 3 |
IEC Class Protection | Class I |
Room Size - Modern Insulation (m²) | 16 |
Room Size - Poor Insulation (m²) | 8 |
Colour | White |
View or download the Ecostrad Accent infrared panel manual here.
View or download the IR remote control user manual here.
View or downlaod the Ecostrad Accent infrared panel datasheet here.
These infrared panels are designed for ceiling mounted fitting; however, they can also be used as a wall mounted solution if desired. Please note that due to their lower wattages, their ‘heats up to’ areas will be reduced when used as a wall heater.
The 270w panel can be used in standard office ceiling grids and simply slots into place with no accessories or kits needed. Otherwise, all of the panels will need to be purchased with either the direct mounting kit or suspension kit, both of which are sold separately.
Ecostrad Accent IR panels are suitable for use in bathrooms provided they are installed in zones 2 or 3 as per the manufacturer’s guidelines. If they are to be installed in a bathroom, they must always be hardwired into a fused spur by a professional electrician. Always defer to the manufacturer’s guidelines regarding the installation and suitability of their products for use in bathrooms.
If you are planning to install multiple heaters, please consult an electrician beforehand to avoid overloading the ring main of your property. They will be able to provide further advice on your project and hardwire your heaters to the mains.
This 800w Ecostrad Accent IR Infrared Ceiling Panel is able to heat up to 16m² and is the largest panel in the range for effective heating in spacious interiors. The ceiling-mounted fitting of the Accent IR allows it to project heat down toward the end user so that all its warmth is going to where it’s needed most.
Accent IR panels heat rooms using far infrared, which is a natural feeling warmth that mimics the type of heat produced by our own bodies. Infrared heat is absorbed by surrounding objects, like the walls, floor and ceiling, to create a lasting warmth that’s evenly distributed throughout the room. As brickwork retains infrared radiant heat, you can warm spaces using less energy and keep running costs to an absolute minimum. The Accent IR uses a carbon crystal film element on the inside of the panel which efficiently conducts heat and allows the heater to be super lightweight. For extra protection, these elements also have a fire-resistant coating which is patented and unique to the product.
The remote control supplied with each Accent IR panel acts as both the room thermostat and the programmer, allowing you to set a custom weekly schedule using its digital interface. You can set an interval Monday to Friday to create start and finish times for your heating during the working week, and set intervals for Saturday and Sunday separately. It also provides access to a comfort override option, as well as open window detection and adaptive start functions. Each remote can be used with any number of Accent IR panels so you can have multiple heaters follow the same routine. If you would prefer to use the heater with an external controller, you can simply use the bypass switch on the rear of the panel which gives you the option of changing your control preference further down the line.
This panel can be installed in two different ways. It can be purchased with a direct mounting kit for a fitting that hugs the ceiling or purchased with a suspension kit so that it can hang down at the height of your choosing.