Checkout using your account
Checkout as a new customer
Creating an account has many benefits:
Call Us
This product is B-grade stock. It may have slight aesthetic imperfections or damaged packaging but otherwise is unused. All B-grade products are tested, re-boxed where possible and contain all documents and fixtures required for installation. The condition of individual units can vary so please call us direct on 0330 880 7001 for more information. We're so confident in the quality of our B-grade stock that we offer the same warranty periods on them as we would a new product.
Brand | Ecostrad |
---|---|
Product Weight (kg) | 6.4 |
Depth (mm) | 30 |
Height (mm) | 1100 |
Width (mm) | 500 |
Wattage (w) | 300 |
Cable Length (m) | 1.5 |
IP Rating | IP44 |
Suitable for Bathrooms | Zone 2 and 3 |
IEC Class Protection | Class I |
Radiator Elements | 23 |
Room Size - Modern Insulation (m²) | 3.5 |
Room Size - Poor Insulation (m²) | 2.5 |
Colour | Chrome |
Download the Fina-E installation manual here and the Fina-E Thermostatic datasheet here.
Download the Ecostrad Digital heating element manual
Download the Fina-E universal mounting template
Radiators and towel rails for bathrooms, cloakrooms and wet rooms must be professionally installed by a qualified electrician and are not sold as a DIY product. Always defer to the manufacturer’s guidelines about the bathroom suitability of any product.
Ecostrad Fina-E thermostatic towel rails come with a pre-fitted electrical element on the right-hand side. If you wish, you can remove the element and switch it to the other side of the towel rail. This is a job for a professional electrician, following the instructions provided in the element manual. It is the installer’s responsibility to ensure the element is correctly fitted in its new location.
Please note: open windows, extractor fans and covering a towel rail, can all impact the heater’s ability to warm a space effectively. Room humidity may also decrease the heat output of your electric towel rail, reducing its effectiveness as a towel dryer.
Please note: towel rail measurements exclude heating element.
This sleek and stylish chrome version of the Ecostrad Fina-E provides an elegant bathroom heating solution with its straight bar design and sparkling finish. Using its thermostatic Ecostrad Digital element, it's also an adaptable and convenient way of heating your bathroom compared to towel rails with only basic manual control.
The Fina-E is filled with a heat-retentive thermal fluid that stays warmer for longer, which means that it uses less energy to maintain its heat levels. The Ecostrad Digital heating element incorporates a room temperature sensor and thermostat, so you can set the temperature of your bathroom to meet your preferred comfort level and the rail will heat as required. For short bursts of heat, the towel rail also comes equipped with a 1-5 hour timer function, where the rail will heat at maximum temperature for a limited duration of your choice: perfect for drying damp towels.
The LED screen on the face of the Ecostrad Digital heating element clearly shows the current set temperature. The control buttons are designed to be safe to use in bathrooms, with the whole product boasting a robust IP44 protection rating and a generous 5 Year Manufacturer's Warranty. With easy controllability, optimal efficiency and the highest safety standards, the Ecostrad Fina-E Thermostatic Electric Towel Rail offers luxury bathroom heating at a fraction of the price.
Electric towel rails and bathroom heaters must always be installed by a professional electrician, however, this is usually a straightforward task with no lengthy callouts required.